top of page
_JET CABIN _ DARK - LONGTAIL.png
JET CABIN _ LIGHT LONGTAIL.png

VVIP |  BIZLINER

NARROW & WIDE-BODY TRANSPORT CATEGORY PRIVATE & HEAD OF STATE JETS 

Luxury Private Jet Sunset Salon.png

P A G E   S P O N S O R

F E A T U R E   A R T I C L E 

Screen Shot 2021-04-29 at 9.53.08 AM.png
Screenshot 2026-10-23 at 4.20.11 PM.png

E D É S E   D O R E T
Founder & President, Edése Doret Industrial Design  |   NYC

23 October, 2026

Beyond The Horizin  |   A Retrospective by Edése Doret

Published  5 November, 2026

BEYOND THE HORIZON

My Journey from Childhood in Haiti to the World of Private Aviation. A career retrospective by Edése Doret.

Where the Journey Began

​

My journey into aviation did not begin in an aircraft hangar, a design studio, or even an airport. It began thousands of miles away, in Port-au-Prince, Haiti, where I was born on May 1, 1967.

​

My earliest childhood memories are of a country filled with extraordinary beauty, vibrant culture, and striking contrasts. My father, Edése Doret Sr., managed one of the American-owned Aulin Colin supermarkets in Haiti, while my mother, Augusta Moreau, worked as a secretary for the Haitian government.

​

We lived in Carrefour, a suburb of Port-au-Prince, where my parents had established a comfortable and prosperous life for our family. Our home was a large house surrounded by spacious grounds, with a swimming pool filled by water from a natural stream that ran through the property. My younger brother Gilbert and I each had our own nanny, and the household included a housekeeper and a groundskeeper who maintained the home and property.

​

It was an idyllic setting in many respects, and one that reflected the life my parents had worked hard to build. Yet beyond the security of our home, Haiti was experiencing profound political turmoil under the dictatorship of François “Papa Doc” Duvalier.

On April 15, 1970, my father made a decision that would forever alter the course of our lives. Concerned about the political instability and the future of his children, he left Haiti for New York City.

​

Seven months later, in November 1970, my mother, my younger brother Gilbert, and I followed him to the United States.

​

I was three years old.

Screenshot 2026-10-24 at 9.53.24 AM.png

At that age, I could not possibly have understood the magnitude of my parents' sacrifice or the opportunities their decision would eventually create. Looking back, however, I recognize just how much they were leaving behind—not only their homeland, but a comfortable home, financial stability, and a way of life they had spent years establishing.

They exchanged that security for the uncertainty of a new beginning in a foreign country, motivated by the hope of providing their children with a safer and more promising future.

And in many ways, their courage and willingness to begin again would eventually shape my own approach to life, creativity, and the pursuit of opportunities beyond the familiar.

​

Discovering a World Through Drawing

​

My childhood in New York City was very different from the life my parents had known in Haiti. My father worked tirelessly to establish himself, initially taking whatever employment opportunities were available before eventually building a 21-year career as an aircraft-component repair technician with Chromalloy Research and Technology in Orangeburg,

​

New York.

​

Our family lived in the Bronx, briefly relocated to Spring Valley, and eventually returned to an apartment on Undercliff Avenue overlooking the Harlem River.

It was during these formative years that drawing became an increasingly important part of my life.

​

I was fascinated by the relationship between imagination and the physical world. I enjoyed drawing objects, environments, and concepts that existed only in my mind. Drawing allowed me to explore ideas without the limitations imposed by materials, budgets, or conventional expectations.

​

I did not yet understand the profession of industrial design, but I was already developing an instinctive appreciation for proportion, perspective, form, and function.

More importantly, I began to recognize that design was not simply about making something visually appealing.

​

It was about imagining what something could become.That distinction would eventually define my professional philosophy.

Screenshot 2026-10-24 at 9.53.02 AM.png

From Art to Industrial Design

​

In 1982, I entered New York City's High School of Art & Design, located at 57th Street and Second Avenue in Manhattan.

​

Initially, my interests centered on illustration. I enjoyed the ability to communicate complex ideas through drawing, but as my education progressed, I became increasingly interested in the relationship between artistic expression and engineering.

I wanted to understand not only how to draw an object, but how it could be manufactured, assembled, and made to function.

​

This curiosity led me toward industrial design.

​

In 1986, I was accepted into Pratt Institute in Brooklyn, where I pursued a Bachelor of Industrial Design, graduating in 1991.

​

Pratt provided an extraordinary foundation for my development as a designer. Its emphasis on creative experimentation, craftsmanship, technical problem-solving, and multidisciplinary thinking encouraged me to look beyond the boundaries of any single design discipline.

​

During my studies, I also worked for several New York-based design firms, gaining practical experience in architecture, product development, graphics, interiors, and aircraft interior design.

​

These experiences helped me understand that the most compelling design solutions often emerge when ideas from seemingly unrelated disciplines intersect.

Architecture could inform furniture design. Product engineering could influence interior detailing. Cultural history could inspire a material palette or the geometry of an entire environment.

​

I became convinced that a designer should never be confined to a single category.

Instead, the designer's responsibility was to understand the problem, challenge assumptions, and create something meaningful.

​

Taking the Leap

​

In September 1991, shortly after graduating from Pratt Institute, I established Edése Doret Industrial Design, Inc. in New York City.I was 24 years old.

​

Starting my own design firm at such a young age was an ambitious decision, particularly in an industry where experience, reputation, and established relationships often determine access to significant projects.

​

But I had a clear objective.

​

I wanted to build a multidisciplinary design studio capable of working across industries while maintaining a consistent philosophy of innovation, technical precision, and artistic integrity.

​

I never wanted to create a firm that simply followed trends or reproduced familiar design formulas.

​

I wanted to create environments and products that possessed their own identity.

Aviation would eventually provide one of the most demanding—and rewarding—opportunities to pursue that ambition.

Screenshot 2026-10-24 at 9.53.43 AM.png

Working at altitude. Flight inside a VIP cabin is its own form of inspiration.

Screenshot 2026-10-24 at 10.36.54 AM.png

Fruits of the labor.  Award-winning Boeing BBJ 737-8 Dragon Rose project.

Discovering the Extraordinary World of Aviation

​

Aircraft interior design occupies a unique position at the intersection of architecture, industrial design, engineering, and human experience.

Unlike a conventional residence or hotel, an aircraft is an extraordinarily complex technical environment.

​

Every surface, material, component, and assembly must satisfy rigorous requirements involving weight, structural integrity, flammability, safety, maintenance, and certification.

Space is finite. Geometry is unforgiving. Every millimeter matters.Yet within those constraints lies an extraordinarily creative opportunity.

​

For me, the challenge has always been to transform an inherently technical environment into a place that feels natural, elegant, and emotionally engaging.

​

I have never believed that a private aircraft should simply resemble a commercial airliner fitted with more expensive seats and decorative finishes.

​

A private aircraft represents something fundamentally different.

It can be a residence, a diplomatic environment, a private office, a sanctuary, or a place where families and friends gather while traveling between continents.

Its interior should reflect the identity, culture, and aspirations of the individual who owns it.

This conviction became central to my approach to aviation design.

Rather than beginning with conventional aircraft interior arrangements, I often approach a project as an architect might approach a private residence.

How should someone experience the space?

What emotions should the environment evoke?

How should natural light, materials, furniture, and architectural elements interact?

And how can all these ambitions be realized within the demanding technical requirements of an aircraft?

​

These questions continue to guide my work today.

​

​

Designing for an International Clientele

​

As Edése Doret Industrial Design expanded, our aviation portfolio grew to include increasingly complex projects for private individuals, royal families, corporations, and Heads of State.

​

Our work eventually encompassed a broad range of aircraft platforms, including Boeing Business Jets, Boeing 747s and 777s, Airbus wide-body aircraft, and specialized VIP conversions.

​

Each program presented a different set of expectations and challenges.

Designing an aircraft for a Head of State, for example, requires an understanding of diplomacy, protocol, privacy, security, and cultural identity that extends far beyond conventional interior design.

​

Similarly, designing a private aircraft for an entrepreneur or family requires an intimate understanding of how the aircraft will be used, whether for business, relaxation, entertaining, or long-distance travel.

​

I have always believed that listening is one of the most important responsibilities of a designer.

​

Before drawing a single line, it is essential to understand the person behind the project.

The most successful interiors are not necessarily those with the most elaborate materials or the most extravagant features.

​

They are the environments that feel entirely appropriate to their owners.

​

Exploring the Possibilities of Wide-Body Aircraft

​

One of the more interesting periods in my career involved a series of projects associated with Las Vegas Sands. These included the Lockheed L-1011-500 “Flying Casino,” a VIP Boeing 747SP, and the conversion of an Airbus A340-500 for private use.

Working with aircraft of this size presented a different perspective on interior design. Unlike smaller business jets, where available space largely dictates how an interior can be organized, wide-body aircraft offer greater flexibility in creating distinct environments for different activities.

​

That freedom, however, introduces another level of complexity.

The challenge is to organize a large interior so that the individual spaces relate naturally to one another, while accommodating the aircraft's structural, mechanical, and operational requirements.

​

I found myself drawing increasingly on my architectural interests, considering circulation, spatial relationships, privacy, and the ways passengers might move through an aircraft during a long journey.

​

Our work with Las Vegas Sands also extended into other disciplines, including the design and construction management of fourteen 47.5-meter catamarans operating between Hong Kong, Macau, and mainland China, as well as the development of the company's corporate aircraft hangar at McCarran International Airport.

Although these projects differed considerably in purpose and scale, they shared many of the same fundamental design considerations.

​

They also reinforced something I had begun to appreciate early in my career: experience in one discipline can often provide valuable insights into another.

​

Understanding Culture Through Design

​

As my work in aviation became increasingly international, I began to appreciate how profoundly cultural traditions influence the expectations people bring to their private environments.

​

This became particularly evident through my longstanding relationship with Royal Jet, the Abu Dhabi-based private aviation operator.

​

Designing aircraft interiors for clients in the Middle East required me to look beyond familiar Western interpretations of luxury and consider how hospitality, privacy, family relationships, and social customs influence the organization of interior spaces.

One example is the traditional majlis, which holds an important place in Arab culture.

A majlis is more than a room in which people gather. Its arrangement reflects traditions of hospitality, conversation, respect, and social interaction.

​

Understanding these principles can influence everything from the positioning of seating to the relationship between public and private areas within an aircraft.

Our work on a Boeing Business Jet for Royal Jet was subsequently recognized with a “Design of the Decade” award from Business Jet Interiors International.

​

While the recognition was gratifying, what stayed with me was the experience of translating cultural references into an interior that also had to meet the practical requirements of modern aviation.

​

I came to appreciate that cultural identity does not necessarily need to be expressed through literal ornamentation or historical references. Sometimes it can be communicated more effectively through proportion, spatial organization, materials, and the way an environment accommodates the people who use it.

​

Continuing the Work with Royal Jet

​

More recently, our relationship with Royal Jet has continued through a commission to design the interiors of three Airbus ACJ320neo aircraft.

​

The project has provided an opportunity to revisit some of the ideas developed during our earlier work while considering how expectations of private aviation have evolved.

Contemporary aircraft owners increasingly look for interiors that offer the comfort, flexibility, and atmosphere of a private residence, particularly on long-distance journeys.

At the same time, advances in materials, lighting, cabin technology, and manufacturing techniques have expanded the possibilities available to designers.

​

For these aircraft, I have drawn inspiration from the architectural and cultural character of Abu Dhabi, including landmarks such as Louvre Abu Dhabi and Qasr Al Hosn.

What interests me about these references is not simply their appearance, but the way they address light, geometry, history, and the relationship between people and their surroundings.

​

Translating those observations into an aircraft interior requires a process of interpretation rather than imitation. Working with Royal Jet and AMAC Aerospace, the aircraft completion specialist, the project also involves the familiar challenge of reconciling architectural ideas with the engineering and certification requirements of an operational aircraft.

It is a process that requires patience and close collaboration among many different disciplines.

​

Even after decades in the industry, I continue to find this progression from an initial idea to a completed aircraft one of the most interesting aspects of the work.

​

What Aviation Has Taught Me

​

Aircraft interiors are often judged by their visual appearance, particularly through photographs and renderings.

​

Yet much of the work that determines whether a design is successful remains invisible to the passenger.

​

Behind every finished surface is a network of engineering decisions, material specifications, structural considerations, aircraft systems, and certification requirements.

Over the years, I have developed a deeper appreciation for the people responsible for translating design concepts into physical reality.

​

Engineers, technicians, craftsmen, manufacturers, and certification specialists all contribute knowledge that can fundamentally influence the outcome of a project.

I have also learned that an idea often changes as it moves through development.

A particular material may prove unsuitable. A structural limitation may require a different solution. A seemingly straightforward detail may become considerably more complicated once manufacturing and maintenance requirements are considered.

These challenges are part of the design process.

​

They require a willingness to reconsider an approach without losing sight of the original intention.

​

For me, one of the most important lessons has been that successful aircraft interior design depends as much on collaboration and technical understanding as it does on creativity.

​

The Value of Working Across Disciplines

​

Although aviation has occupied an important place in my professional life, I have continued to maintain an interest in other areas of design.

My education was rooted in industrial design, and over the years our studio has worked on projects involving yachting, automotive design, residential environments, and consumer products.

​

Our work has also resulted in 32 design patents and two mechanical patents.

I have found that moving between disciplines encourages a different way of approaching problems.

 

An aircraft seat, for example, can be considered not only as a piece of aviation equipment but also as a product involving ergonomics, mechanical engineering, upholstery, and furniture design.

​

Likewise, the planning of an aircraft cabin can benefit from architectural principles normally associated with residential or hospitality environments.

The differences between these industries are significant, but so are the connections.

I have always enjoyed exploring those connections because they encourage me to question established conventions and consider alternatives that might otherwise be overlooked.

​

Reflecting on the Journey

​

Looking back, I sometimes find it remarkable how the different chapters of my life have come together.

​

When my family arrived in New York City in November 1970, my parents were focused on establishing a new life and creating opportunities for their children.

​

I doubt that anyone could have anticipated the direction my career would eventually take.

Growing up in the Bronx, I was simply a young boy who enjoyed drawing.

At the High School of Art & Design, that interest began to develop into a more serious pursuit. At Pratt Institute, I discovered how artistic ideas could be connected to engineering and manufacturing.

​

When I founded Edése Doret Industrial Design in 1991, I was eager to establish my own creative direction, although I had little idea of the range of projects and experiences that lay ahead.

​

Aviation eventually became an important part of that journey, taking me to different countries and introducing me to people whose backgrounds, cultures, and expectations were often very different from my own.

​

Each project brought new challenges and, just as importantly, new opportunities to learn.

The tools available to designers have changed considerably since I began my career. Digital modeling, visualization technology, advanced manufacturing processes, and new materials have transformed the way we develop and communicate ideas.

​

Yet the underlying questions remain surprisingly familiar. How can a space function better?

How can an object be made more useful?

How can design improve the experience of the people who interact with it?

Those were questions that interested me as a student, and they continue to guide my work today.

​

​

Looking Ahead

​

After more than three decades in the profession, I remain interested in how aviation interiors will evolve.

Changes in technology, passenger expectations, aircraft capabilities, and the ways people live and work are continually influencing the design of private aircraft.

I believe there will be increasing opportunities to rethink traditional cabin arrangements and develop environments that respond more naturally to the needs of individual passengers.

​

At the same time, the fundamental challenges of aircraft design—limited space, weight, safety, engineering, and certification—will remain.

Finding ways to work creatively within those constraints is what has kept the profession interesting to me.

​

When I think about the distance between my childhood in The Bronx and the work I do today, I am reminded of the decision my parents made more than half a century ago.

Their willingness to leave behind a familiar life and begin again in another country created opportunities that would eventually allow me to pursue a career I could never have imagined as a child.

​

I have been fortunate to spend much of my professional life transforming ideas into physical environments, often aboard aircraft traveling between countries and continents.

And despite the changes I have witnessed throughout the industry, the part of the process I enjoy most remains remarkably simple.

​

It is still that moment when I sit down with a blank sheet of paper and begin to imagine what something could become.

​

​

_________________________________________________________________________________

 

 

 

Edése Doret is the founder and president of Edése Doret Industrial Design, Inc., a New York City-based multidisciplinary design firm established in 1991, with experience in private and Head-of-State aircraft interiors, yachting, industrial design, and residential environments.

Screenshot 2026-09-30 at 9.57.22 PM.png
ADLINK.png
Camber Ad Nov 2026 V2 - 1190x1590 150dpi.jpg
ADLINK.png
Screenshot 2026-09-30 at 11.01.01 AM.png
ADLINK.png
Screenshot 2026-09-30 at 9.49.57 AM.png
ADLINK.png
NEW BUILD ELEMENTS - Untitled Page.png

JetCabin Magazine is committed to accurate, fair, and transparent reporting. We strive to verify facts with credible sources and correct errors promptly and visibly when they are found. Corrections and clarifications are welcome at any time.

​

Editorial content is produced independently. Where companies, products, or services are featured, that coverage reflects editorial judgment, and any sponsored or advertiser-supported content is clearly identified as such. Information supplied by manufacturers, suppliers, and other third parties is attributed to its source and presented in good faith, though it may not be independently verified. We respect intellectual property and credit photography, artwork, and sources wherever possible. Opinions expressed by contributors are their own and do not necessarily reflect those of the publication.

​

Readers are encouraged to confirm specifications, certifications, and regulatory details directly with the relevant companies and authorities before making purchasing or operational decisions.

JETCABIN _ LIGHT copy.png
Screen Shot 2021-04-29 at 9.53.08 AM.png
bottom of page